TOP
0
0
魅麗。花火原創小說66折起
TMS 2012 SUPPLEMENTAL PROCEEDINGS, VOLUME 1:MATERIALS PROCESSING AND INTERFACES
滿額折

TMS 2012 SUPPLEMENTAL PROCEEDINGS, VOLUME 1:MATERIALS PROCESSING AND INTERFACES

定  價:NT$ 7798 元
優惠價:907018
若需訂購本書,請電洽客服 02-25006600[分機130、131]。
相關商品
商品簡介
作者簡介
目次

商品簡介

Contains papers relating to materials processing and interfaces presented at various symposia at the 2012 TMS Annual Meeting.

作者簡介

Headquartered in the United States but international in both its membership and activities, The Minerals, Metals & Materials Society (TMS) is a rare professional organization that encompasses the entire range of materials and engineering, from minerals processing and primary metals production to basic research and the advanced applications of materials.

目次

Advances in Surface Engineering: Alloyed and Composite CoatingsSession II
Structural Coatings in Aluminum Alloy Microtruss Materials 3B. Yu, and G. Hibbard
Laser Cladding of High-Performance CPM Tool Steels on Hardened H13 Hot-Work Tool Steel for Automotive Tooling Applications 11J. Chen, and L. Xue
Electron Beam Deposited Multilayer Optical Interference Coatings Using Oxide Composites 19A. Nayak, N. Sahoo, R. Tokas, A. Biswas, and N. Kamble
Session III
Microstructure and Wear Properties of Laser In-situ Formation of TiBx and TiC Titanium Composite Coatings 27J. Liang, C. Liu, S. Chen, and C. Ren
Creep Behavior of Plasma Sprayed Y-PSZ Coated 6063-T6 Aluminum Alloy 35E. Erzi, C. Kahruman, and S. Yilmaz
Contribution of Ti Addition to the Electronic Structure and Adhesion at the Fe2Al5/Fe Interface in 55%Al-Zn Coating 41G. Wu, Y. Ren, J. Zhang, and K. Chou
Session IV
The Roles of Diffusion Factors in Electrochemical Corrosion of TiN and CrN (CrSiCN) Coated Mild Steel and Stainless Steel 49F. Cai, Q. Yang, and X. Huang
Effect of Electroplating Parameters on "HER" Current Density in Ni-MoS2 Composite Plating 57E. Saraloglu Guler, I. Karakaya, and E. Konca
Production of Ceramic Layers on Aluminum Alloys by Plasma Electrolytic Oxidation in Alkaline Silicate Electrolytes 65A. Lugovskoy, A. Kossenko, B. Kazanski, and M. Zinigrad
Abrasive Wear Properties of Plasma Sprayed Y-PSZ Coated 6063-T6 Aluminum Alloy 73E. Erzi, S. Yildirim, and S. Yilmaz
The Electrochemical Behavior of Surgical Grade 316L S S with and without HA Coatings in Simulated Body Fluid 79T. Singh, H. Singh, H. Singh, and H. Saheet
Modification Research on the Influence on Corrosion Film Properties of Pb-Ca-Sn Alloys of with Addition of Bi, Ag and Zn 87L. Xu, L. Liu, and P. Zhu
Session V
Evaluation of Residual Stress in Fe2B Coating on Ductile Cast Iron 95M. Donu Ruiz, N. Lopez Perrusquia, V. Cortez Suarez, and D. Sanchez Huitron
General Poster SessionSession I
Influence of Heat Treatment on the Corrosion of Steels in CCS Environment 103A. Pfennig, S. Schulz, A. Kranzmann, T. Werlitz, S. Wetzlich, E. Billow, J. Tietböhl, and C. Frieslich
Microstructure and Property Modifications in Mould Steels Treated by Pulsed Electron Beam 111K. Zhang
Potential Fiberboard Material from Cow Manure and Disposable Water Bottle 119B. Ng, M. Murray, C. Bradfield, and R Pritish
Influence of Process and Thermo-physical Parameters on the Heat Transfer at Electron Beam Melting of Cu and Ta 125K. Vutova, V. Donchev, V. Vassileva, and G. Mladenov
Industrial Use of a New Ultrasound Spray for Cooling and Wet Gas Treatment in the Pyrometallurgical Processes 133M. Cirkovic, V. Trujic, and Z. Kamberovic
Development of 3D Porous Nickel Electrodes for Hydrogen Production 141V. Pérez-Herranz, I. Herrâiz-Cardona, E. Ortega, and J. Garcia-Anton
Electrochemical Recovery of Zinc Present in the Spent Pickling Baths Coming from Hot Dip Galvanizing Processes 149V. Pérez-Herranz, J. Carrillo-Abad, M. Garcia-Gabaldôn, and E. Ortega
Laboratory Testing Results of Kinetics and Processing Technology of the Polymetallic Sulphide Concentrate Blagojev Kamen - Serbia 157M. Cirkovic, Z. Kamberovic, and V. Trujic
Hidrotalcite with Gentamicine, of the Type Mg0.68Al0.32(OH)2 (NO3)0.32*0.1H2O, Formed by Chemical Coprecipitation in Controlled Atmosphere 165H. Rodriguez-Santoyo, and O. Martinez-Alvarez
Effect of Thiodiglycolamide Addition to Di-n-hexyl Sulfide on the Pd(II) Extraction Rate 173H. Narita, M. Tanaka, and S. Ueno
Synthesis and Characterization of Metallic Oxides 179E. Brocchi, R. Souza, M. Doneda, J. Campos, A. Wimmer, and R. Navarro
Fabrication of Lotus-Type Porous Copper by Centrifugal Casting Technique 187Y. Lee, H. Kim, M. Kim, and S. Hyun
Effects of Pulsed Magnetic Annealing on the Grain Boundary of Primary Recrystallized Microstructure in the Grain-Oriented Silicon Steel 191J. Huang, L. Liu, X. Xia, X. Jiang, L. Li, and Q. Zhai
Relationship between Heat Input and Microstructure and Mechanical Properties of Laser Beam Welded Superalloy Inconel 718 199A. Odabasi, N. Ünlti, G. Göller, M. Eruslu, and E. Kayali
Experimental Study on the Behavior of Slag Entrapment and Inclusion Removal in 44 t Ladle with Argon Blowing 207S. Zheng, M. Zhu, and Z. Cheng
The Effect of High Superheat on the Solidification Structure and Carbon Segregation of Ferrite-Based Alloy 215H. Zhong, Y. Tan, H. Li, X. Mao, and Q. Zhai
Refinement of Ligaments of Nanoporous Ag Ribbons by Controlling the Surface Diffusion of Ag 223T. Song, Y. Gao, Z. Zhang, and Q. Zhai
Thermal Analysis of the Composition of Poly(Acrylic Acidy / Carboxymethylstarch Used as a Polymeric Binder 231B. Grabowska, M. Holtzer, S. Eichholz, K. Hodor, and E. Olejnik
Mechanical Behavior Related to Interface PhysicsGrain Boundaries; Experiment and Modeling
Interfacial Strength of Al/Zr/DU-10%wtMo Subject to Different Loading Modes 241M Lovato, C. Liu, and W. Blumenthal
Interface Evolution under Mechanical Loading: Experiment, Characterization, and Theoretical Modeling
Uniaxial Tension of Friction-Welded 304-Stainless Steel and 6061 Aluminum 249C. Liu, M. Lovato, and W. Blumenthal
Interface Structures; Characterization, Theory, and Modeling
Ultra Fast Grain Boundary Segregation In Hot Deformed Nickel 257M Allart, F. Christien, and R. Le Gall
Quantitative NanoSIMS Analysis of Grain Boundary Segregation in Bulk Samples 265F. Christien, K. Moore, C. Downing, and C. Grovenor
The Periodic Unit of Doubly-diffracted Reflections from Periodic Grain Boundaries in Cubic Crystals and Its Relationship with Coincident Site Lattice 273M. Shamsuzzoha
Poster Session
The In-situ Intrinsic Stress Measurements of Cu and Al Thin Films 281J. Yu, and Y. Kim
Delamination Characterization of Bonded Interface Using Surface Based Cohesive Model 289M. Ramamurthi, and Y. Kim
Nanocomposites
Mechanical Behavior and Modelling of Nanocomposites
Compressive Strength of Epoxy- Graphite Nanoplatelets Composites 299H. Colorado, A. Wong, and J. Yang
Micromechanical Analysis of Influences of Agglomerated Nanotube Interphase on Effective Material Properties of a Three Phase Piezoelectric Nanocomposite 307T. Tang, and P. Wang
Effect of Nano-Paper Coating on Flexural Properties of a Fire-Treated Glass Fiber-Reinforced Polyester Composite 313J. Skovron, J. Zhuge, A. Gordon, J. Kapat, and J. Gou
Finite Element Modeling of the Nanoscratching of Polymer Surfaces 321W. Chirdon, and J. Rozas
Processing of Nanocomposites I
Manufacturing and Characterization of an Auxetic Composite 329F. Chiang
Microtruss Cellular Nanocomposites 337K. Abu Samk, G. Huang, M. Skocic, H. Zur ob, D. Embury, O. Bouaziz, and G. Hibbard
Nanocomposites for Magnetic and Dielectric Applications
Synthesis of Tailored Core-Shell Magnetic Microparticles for Intravascular Embolization 345G. Ferreira, A. Umpierre, and F. Machado
Dramatic Expansion of Luminescence Region in GaP/Polymer Nanocomposites 353S. Pyshkin, and J. Ballato
Nanocomposite Interfaces and Characterization
Positron Lifetime Analysis of Polyurea-Nanoclay Composites 361N. Seetala, D. Hubbard, G. Burks, A. Trochez, and V. Khabashesku
Processing of Nanocomposites II
Rheological Properties of Suspensions of Nanopowders Yttrium Oxide (Y203) and Magnesium-Aluminum Spinel (MgAl204) 367G. Zyla, M. Cholewa, A. Witek, J. Plog, V. Lehmann, T. Oerther, and D. Gross
Thermal Properties of Hemp-High Density Polyethylene Composites: Effect of Two Different Chemical Treatments 375N. Lu, and S. Oza
Discarded Ultrafine Particulate Carbonaceous Materials Used as Reinforcers of Rubber Vulcanized Products 383G. Martin-Cortés, F. Esper, L. Galvào Dantas, W. Hennies, and F. Valenzuela-Diaz
Properties of Additional Reinforcers Materials Used to Complement NAOB - A Rubber / Organoclay Nanocomposite Material 389F. Esper, G. Martin-Cortés, L. Dantas, A. Cutrim, W. Hennies, and F. Valenzuela-Diaz
Poster Session
Thermal Properties of Carbon Nano Tubes Reinforced Mg-Matrix Nanocomposites 395S. Iqbal, A. Mustafa, S. Talapatra, and P. Filip
New Advances in Synthesis, Characterization, and Application of Layered Double HydroxidesSession I
Designing Layered Double Hydroxides for Targeted Applications 405J. Hossenlopp, S. Majoni, and C. Machingauta
Electrochemical Synthesis of Layer Double Hydroxides, Its Characterization, and Performance Study for Removal of Nitrate and Arsenic 413M. Haider, J. Gomes, K. Urbanczyk, D. Cocke, H. McWhinney, G. Irwin, and P. Bernazzani
Removal of Direct Red and Orange II Azo Dye from Synthetic Textile Water Using Electrochemically Produced Fe-LDH 421S. Jame, J. Gomes, and D. Cocke
Removal of Arsenic Using Green Rust and Other Electrochemically Generated Floe 429M. Rahman, J. Gomes, K. Urbanczyk, and D. Cocke
Formation of Layered Double Hydroxides in Self-Purification of Polynary Metal Electroplating Wastewaters for Effective Removal of Anionic Dye 437J. Zhou, G. Qian, C. Liu, Y. Wu, X. Ruan, Y. Xu, andJ. Liu
Characterization and Chemical Modification of Electrochemically Produced Layered Double Hydroxides as Nanomaterials 445M. Islam, J. Gomes, and P. Bernazzani
Randall M. German Honorary Symposium on Sintering and Powder-Based MaterialsSintering Theory and Practice
A Review on Alloying in Tungsten Heavy Alloys 455A. Bose, R. Sadangi, and R. German
Current Activated and Conventional Sintering
Low-Thermal Load Consolidation of Sm-Fe-N Flake Powder by Combination of Cyclic Compression and Current Sintering 467K. Takagi, H. Nakayama, and K. Ozaki
Fabrication of TiN / Fe-Al Cermet from Mixture of TiN, Fe and Al Powders 475H. Nakayama, K. Ozaki, and K. Kobayashi
Transparent Polycrystalline Alumina Obtained by SPS: Single and Double Doping Effect 481B. Apak, H. Kanbur, E. Ozkan Zayim, G. Goller, O. Yucel, and F. Cinar Sahin
Sintering of Nanocrystalline Tungsten Powder 489W. de Rosset
Powder Technology
Effect of Powder Synthesis and Processing on Luminescence Properties 497J. McKittrick, J. Han, J. Choi, and J. Talbot
Effect of Rapid Solidification and Heat Treatment on D2 Tool Steel 505P. Delshad Khatibi, H. Henein, and D. Ivey
Powder Processing and Consolidation I
Development of Solid Freeform Fabrication for Metallic Parts Using Selective Inhibition of Sintering 513M. Yoozbashizadeh, and B. Khoshnevis
Numerical Simulation of Cold Pressing of Armstrong CP-Ti Powders 521A. Sabau, S. Gorti, W. Peter, W. Chen, and Y. Yamamoto
The Effect of Coke Particle Size on the Thermal Profile of the Sintering Process Product 529N. Tahanpesarandezfuly, and A. Heidary Moghadam
Powder Processing and Consolidation II
Powder Material Principles Applied to Additive Manufacturing 537D. Bourell, and J. Beaman
Processing Challenges of Dual-Matrix Carbon Nanotube Aluminum Composites 545A. Esawi, K. Morsi, I. Salama, and H. Saleeb
Influence of High Pressure Torsion on the Consolidation Behavior and Mechanical Properties of AA6061-SiCp Composite Powders 553H. Salem, W. El-Garaihy, and E. Rassoul
Powder Processing and Consolidation III
LASER Powder Deposition of AlMgBi4-TiB2 Ultra-Hard Coatings on Titanium and Steel Substrates 561J. Fuerst, M. Carter, and J. Sears
Mechanical Properties of Spark Plasma Sintered ZrC-SiC Composites 569S. Sagdic, I. Akin, F. Sahin, O. Yucel, and G. Goller
Intense Pulsed Light Sintering Technique for Nanomaterials 577H. Colorado, S. Dhage, J. Yang, and H. Hahn
Recent Developments in Biological, Electronic, Functional and Structural Thin Films and CoatingsProcess-Properties-Performance Correlations I
Dependence of Tribology of Carbide Derived Carbon Films on Humidity 587M. Tlustochowicz
Structural and Optical Properties of Silicon Carbonitride Thin Films Deposited by Reactive DC Magnetron Sputtering 595O. Agirseven, T. Tavsanoglu, E. Ozkan Zayim, and O. Yucel
Influence of TIG Re-Melting and RE (La203) Addition on Microstructure, Hardness and Wear of Ni-WC Composite Coating 603B. Dhakar, D. Dwivedi, and S. Sharma
Evaluation of Mechanical Properties of Ni-Ti Bi-Layer Thin Film 609M. Mohri, and M. Nili-Ahmadabadi
Anodic Ti02 Nanotubular Arrays with Pre-Synthesized Hydroxyapatite - A Promising Approach to Enhance the Biocompatibility of Titanium 617L. Wang
Preparation and Properties of Cu2ZnSnS4 Thin Films by Electrodeposition and Sulfurization 625C. An, H. Lu, andX. Chen
Process-Properties-Performance Correlations II
Formation of Crystalline and Amorphous Phases During Deposition of NixTi1-x Thin Film on Si Substrate - Interpretation of Experimental Results Using Molecular Dynamics Simulations 633S. A ich, G. Priyadarshini, M. Gupta, S. Ghosh, and M. Chakraborty
Applications to Bio, Energy and Electronic Systems
Doping and Co-Doping of Bandgap-Engineered ZnO Films for Solar Driven Hydrogen Production 641S. Shet, N. Ravindra, Y. Yan, and M. Al-Jassim
Magnetic Field Assisted Heterogeneous Device Assembly 651V. Kasisomayajula, M. Booty, A. Fiory, and N. Ravindra
Organic Thermal Mode Photoresists for Applications in Nano-Lithography 663H. Wu, M. Li, C. Yang, C Cheng, S. Chen, and D. Huang
Process-Properties-Performance Correlations III
Nitrogen Doped ZnO (ZnO:N) Thin Films Deposited by Reactive RF Magnetron Sputtering for PEC Application 669S. Shet, K. Ahn, N Ravindra, Y. Y an, and M. Al-Jassim
Spin-Coated Erbium-Doped Silica Sol-Gel Films on Silicon 677S. Abedrabbo, B. Lahlouh, S. Shet, A. Fiory, and N. Ravindra
Influence of Annealing on the Martensitic Transformation and Magnetocaloric Effect in Ni49Mn39Sni2 Ribbons 685D. Wu, S. Xue, H. Zheng, and Q. Zhai
Metal Diaphragm Based Magnetic Field Sensor 693A. Banobre, I. Padron, A. Fiory, and N. Ravindra
Optical and Electronic Properties of AlN, GaN and InN: An Analysis 701C. Lamsal, D. Chen, and N. Ravindra
Science and Engineering of Light Metal Matrix Nanocomposites and CompositesMetal Matrix Nanocomposites
Interfacial Analysis of CNT Reinforced AZ61 Mg Alloy Composites 717K. Kondoh, H. Fukuda, J. Umeda, and B. Fugetsu
Biodegradability and Mechanical Performance of Hydroxyapatite Reinforced Magnesium Matrix Nanocomposite 725C. Ma, L. Chen, J. Xu, A. Fehrenbacher, Y. Li, F. Pfefferkorn, N. Duffie, J. Zheng, and X. Li
Mechanical Properties of A356-CNTCast Nano Composite Produced by a Special Compocasting Route 733B. Abbasipour, B. Niroumand, and S. Monirvaghefi
Production of Cast AZ91-CNT Nano-Composite by Addition of Ni-P-CNT Coated Magnesium Powder to the Melt 741M. Firoozbakht, B. Niroumand, and S. Monirvaghefi
Wear Behavior of Magnesium Matrix Nanocomposites at Room and Elevated Temperature 749W. Li, and S. Liu
Nanocomposites and Composites
Uniform Dispersion of Nanoparticles in Metal Matrix Nanocomposites 757L. Chen, H. Choi, A. Fehrenbacher, J. Xu, C. Ma, and X. Li
Effect of Core-shelled Nanoparticles of Carbon-Coated Nickel on Magnesium 765Y. Sun, H. Choi, H. Konishi, V. Pikhovich, R. Hathaway, and X. Li
In Situ Composite of (Mg2Si)/Al Fabricated by Squeeze Casting 775H. Lus, G. Ozer, and K. Guler
Optimization of Tensile Strength of Friction Stir Welded Al-(10 tol4 wt.%) TiB2 Metal Matrix Composites 783S. Joseph Vijay, N. Murugan, and S. Parameswaran
Metal Matrix Composites
Slow-Shot High Pressure Die-Casting (SS-HPDC) Process for AE44 Magnesium Single-Cylinder Engine Block with Short-Fiber Reinforcement in the Bore 791B. Hu, P. Wang, B. Powell, and X. Zeng
Compressive Properties of Al-B4C Composites over the Temperature Range of 25-500°C 799S. Gangolu, A. Rao, N. Prabhu, V. Deshmukh, and B. Kashyap
Aluminum Metal Matrix Composite via Direct Metal Laser Deposition: Processing and Characterization 807B. Wälder a, and S. Kalita
Damage Evolution Model for Hybrid Metal Matrix Composites 815J. Dibelka, and S. Case
Numerical Simulation of Pressure Infiltration Process for Making Metal Matrix Composites: Effect of Process Parameters 823B. Wang, and K. Pillai
Titanium: Advances in Processing, Characterization and PropertiesProcessing and Process Modeling I
Microstructural Evolution and Mechanical Properties of ß-Titanium Ti-l0V-2Fe-3Al during Incremental Forming 833S. Winter, S. Fhtsch, and M. Wagner
Study on Hot Deformation Behavior of TC4 Titanium Alloy 841Y. Lu, S. Jiao, X. Zhou, and A. Dong
Evolution of Microstructures and Properties of Ti-44Al-6V-3Nb-0.3Y Alloy after Forging and Rolling 849Y. Chen, H. Niu, S. Xiao, P. Sun, and C. Zhang
Effect of Forging on Microstrutural Characteristic and Tensile Properties of In-Situ (TiB+TiC)/Ti Composite 857Y. Chen, C. Zhang, S. Xiao, D. Wu, and H. Niu
Processing and Process Modeling II
Microstructure and Mechanical Properties of Ti-6A1-4V Fabricated by Selective Laser Melting 863M. Simonelli, Y. Tse, and C. Tuck
Computational Modeling of the Dissolution of Alloying Elements 871J. Ou, A. Chatterjee, D. Maijer, S. Cockcroft, and C. Reilly
Cost Effective and Eco-Friendly Process for Preparation of Wrought Pure Ti Material via Direct Consolidation of TiH2 Powders 879T. Mimoto, N. Nakanishi, T. Threrujirapapong, J. Umeda, and K. Kondoh
Effect of Dual-Laser Beam Welding on Microstructure Properties of Thin-Walled y-TiAl Based Alloy Ti-45Al-5Nb-0.2C-0.2B (TNB) 887J. Liu, V. Ventzke, P. Staron, H. Brokmeier, M. Oehring, N. Kashaev, and N. Huber
Microstructure Evolution and Characterization I
Recrystallization Behavior in Ti-13Cr-1Fe-3Al Alloy after Severe Plastic Deformation 895M. Ueda, H. Matsuhira, Y. Takasaki, M. Ikeda, and Y. Todaka
Mechanical Properties
Crack Initiation and Microstructurally Short Crack Growth of Ti-6A1-4V 903H. Christ, H. Knobbe, P. Koester, C. Fritzen, and M. Riedler
Three-dimensional Investigation of the Microtexture near Tensile Crack Tip in Ti-6A1-4V 911X. Xu, Y. Tse, G. West, and A. Huang
Machinability of ß-Titanium Alloy Ti-10V-2Fe-3Al with Different Microstructures 919H. Abrahams, C. Mâchai, and D. Biermann
Residual Stress Relaxation Effects on the Cracking and Wear Processes of Shot Peened Ti-6A1-4V Titanium Alloy under Fretting-Fatigue Loading 927R. Ferre, S. Fouvry, B. Berthel, R. Amargier, and A. Ferre
General Abstracts
Efficient Oxidation Protection of Ti- and TiAl-alloys by F-treatments 935A. Donchev, M. Schütze, R. Yankov, and A. Kolitsch
Characteristics and Wear Performance of Nitrided Ti6A17Nb 941F. Siyahjani, M. ïpekci, and H. Cimenoglu
Composition Analysis of Diffusion Bonded y-TiAl Intermetallic: TiAlV Alloy Interface by Using STEM 947P. Sivagnanapalani, Gouthama, andM. Sujata
Effect of Erbium Addition on Microstructre of As-Cast Ti-22Al-25Nb Alloy 955J. Dai, H. Lu, and Z. Cai
Fracture Behaviors of TiN and TiN/Ti Multilayer Coatings on Ti Substrate during Nanoindentation 963Y. Sun, C. Lu, A. Tieu, Y. Zhao, H. Zhu, K. Cheng, and C. Kong
Deformation Mechanism in Nanoindentation of Ti63.375Fe34.i25Sn2 5 Alloy 971K. Cheng, C. Lu, K. Tieu, L. Zhang, and Y. Sun
Wettability and Interfacial Phenomena between Metals and Ceramic/Refractory MaterialsSession I
Chemical Wear of Basic Brick Linings in the Non-Ferrous Industry 981D. Gregurek, A. Spanring, M Kirschen, andC. Majcenovic
Study on Wettability of Cu and 85Cu-15Ni Alloy on 18NiO-NiFe204 Composite Ceramics 989J. Du, Y. Liu, G. Yao, Z. Zhang, and G. Zu
Interfacial Reactions in the Liquid/Solid and Liquid/Vapor Interfaces of Al-Si-Mg Alloys and Bl 2 (Bc2) Substrates 997O. Herr era-Romero, M. Pech-Canul, Z. Chaudhury, and G. Newaz
TMS2011 General Abstracts: Structural Materials DivisionMicrostructure
Microstructure of a' Martensites in Ti-V-Al Alloys Studied by High-Resolution Transmission Electron Microscopy 1007K. Sato, H. Matsumoto, A. Chiba, and T. Konno
Author Index 1013
Subject Index 1019

您曾經瀏覽過的商品

購物須知

外文書商品之書封,為出版社提供之樣本。實際出貨商品,以出版社所提供之現有版本為主。部份書籍,因出版社供應狀況特殊,匯率將依實際狀況做調整。

無庫存之商品,在您完成訂單程序之後,將以空運的方式為你下單調貨。為了縮短等待的時間,建議您將外文書與其他商品分開下單,以獲得最快的取貨速度,平均調貨時間為1~2個月。

為了保護您的權益,「三民網路書店」提供會員七日商品鑑賞期(收到商品為起始日)。

若要辦理退貨,請在商品鑑賞期內寄回,且商品必須是全新狀態與完整包裝(商品、附件、發票、隨貨贈品等)否則恕不接受退貨。

優惠價:90 7018
若需訂購本書,請電洽客服 02-25006600[分機130、131]。

暢銷榜

客服中心

收藏

會員專區