定價
：NT$ 2697 元優惠價
：95 折 2562 元
無庫存，下單後進貨(到貨天數約30-45天)
可得紅利積點：76 點
相關商品
商品簡介
商品簡介
This book introduces the subject of total design, and introduces the design and selection of various common mechanical engineering components and machine elements. These provide "building blocks", with which the engineer can practice his or her art.
The approach adopted for defining design follows that developed by the SEED (Sharing Experience in Engineering Design) programme where design is viewed as "the total activity necessary to provide a product or process to meet a market need." Within this framework the book concentrates on developing detailed mechanical design skills in the areas of bearings, shafts, gears, seals, belt and chain drives, clutches and brakes, springs and fasteners. Where standard components are available from manufacturers, the steps necessary for their specification and selection are developed.
The framework used within the text has been to provide descriptive and illustrative information to introduce principles and individual components and to expose the reader to the detailed methods and calculations necessary to specify and design or select a component. To provide the reader with sufficient information to develop the necessary skills to repeat calculations and selection processes, detailed examples and worked solutions are supplied throughout the text.
This book is principally a Year/Level 1 and 2 undergraduate text. Pre-requisite skills include some year one undergraduate mathematics, fluid mechanics and heat transfer, principles of materials, statics and dynamics. However, as the subjects are introduced in a descriptive and illustrative format and as full worked solutions are provided, it is possible for readers without this formal level of education to benefit from this book. The text is specifically aimed at automotive and mechanical engineering degree programmes and would be of value for modules in design, mechanical engineering design, design and manufacture, design studies, automotive power-train and transmission and tribology, as well as modules and project work incorporating a design element requiring knowledge about any of the content described.
The aims and objectives described are achieved by a short introductory chapters on total design, mechanical engineering and machine elements followed by ten chapters on machine elements covering: bearings, shafts, gears, seals, chain and belt drives, clutches and brakes, springs, fasteners and miscellaneous mechanisms. Chapters 14 and 15 introduce casings and enclosures and sensors and actuators, key features of most forms of mechanical technology. The subject of tolerancing from a component to a process level is introduced in Chapter 16. The last chapter serves to present an integrated design using the detailed design aspects covered within the book. The design methods where appropriate are developed to national and international standards (e.g. ANSI, ASME, AGMA, BSI, DIN, ISO).
The first edition of this text introduced a variety of machine elements as building blocks with which design of mechanical devices can be undertaken. The approach adopted of introducing and explaining the aspects of technology by means of text, photographs, diagrams and step-by-step procedures has been maintained. A number of important machine elements have been included in the new edition, fasteners, springs, sensors and actuators. They are included here. Chapters on total design, the scope of mechanical engineering and machine elements have been completely revised and updated. New chapters are included on casings and enclosures and miscellaneous mechanisms and the final chapter has been rewritten to provide an integrated approach. Multiple worked examples and completed solutions are included.
* New chapters on casings and enclosures, springs, and fasteners
* New information on important machine elements such as sensors and actuators
* Clear explanation of the total mechanical design process through the use of text,
The approach adopted for defining design follows that developed by the SEED (Sharing Experience in Engineering Design) programme where design is viewed as "the total activity necessary to provide a product or process to meet a market need." Within this framework the book concentrates on developing detailed mechanical design skills in the areas of bearings, shafts, gears, seals, belt and chain drives, clutches and brakes, springs and fasteners. Where standard components are available from manufacturers, the steps necessary for their specification and selection are developed.
The framework used within the text has been to provide descriptive and illustrative information to introduce principles and individual components and to expose the reader to the detailed methods and calculations necessary to specify and design or select a component. To provide the reader with sufficient information to develop the necessary skills to repeat calculations and selection processes, detailed examples and worked solutions are supplied throughout the text.
This book is principally a Year/Level 1 and 2 undergraduate text. Pre-requisite skills include some year one undergraduate mathematics, fluid mechanics and heat transfer, principles of materials, statics and dynamics. However, as the subjects are introduced in a descriptive and illustrative format and as full worked solutions are provided, it is possible for readers without this formal level of education to benefit from this book. The text is specifically aimed at automotive and mechanical engineering degree programmes and would be of value for modules in design, mechanical engineering design, design and manufacture, design studies, automotive power-train and transmission and tribology, as well as modules and project work incorporating a design element requiring knowledge about any of the content described.
The aims and objectives described are achieved by a short introductory chapters on total design, mechanical engineering and machine elements followed by ten chapters on machine elements covering: bearings, shafts, gears, seals, chain and belt drives, clutches and brakes, springs, fasteners and miscellaneous mechanisms. Chapters 14 and 15 introduce casings and enclosures and sensors and actuators, key features of most forms of mechanical technology. The subject of tolerancing from a component to a process level is introduced in Chapter 16. The last chapter serves to present an integrated design using the detailed design aspects covered within the book. The design methods where appropriate are developed to national and international standards (e.g. ANSI, ASME, AGMA, BSI, DIN, ISO).
The first edition of this text introduced a variety of machine elements as building blocks with which design of mechanical devices can be undertaken. The approach adopted of introducing and explaining the aspects of technology by means of text, photographs, diagrams and step-by-step procedures has been maintained. A number of important machine elements have been included in the new edition, fasteners, springs, sensors and actuators. They are included here. Chapters on total design, the scope of mechanical engineering and machine elements have been completely revised and updated. New chapters are included on casings and enclosures and miscellaneous mechanisms and the final chapter has been rewritten to provide an integrated approach. Multiple worked examples and completed solutions are included.
* New chapters on casings and enclosures, springs, and fasteners
* New information on important machine elements such as sensors and actuators
* Clear explanation of the total mechanical design process through the use of text,
您曾經瀏覽過的商品
購物須知
外文書商品之書封，為出版社提供之樣本。實際出貨商品，以出版社所提供之現有版本為主。部份書籍，因出版社供應狀況特殊，匯率將依實際狀況做調整。
無庫存之商品，在您完成訂單程序之後，將以空運的方式為你下單調貨。為了縮短等待的時間，建議您將外文書與其他商品分開下單，以獲得最快的取貨速度，平均調貨時間為1~2個月。
為了保護您的權益，「三民網路書店」提供會員七日商品鑑賞期(收到商品為起始日)。
若要辦理退貨，請在商品鑑賞期內寄回，且商品必須是全新狀態與完整包裝(商品、附件、發票、隨貨贈品等)否則恕不接受退貨。