Manufacturing Techniques for Materials ― Engineering and Engineered

Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.

Dr. T.S. Srivatsan is Professor of Materials Science and Engineering in the Department of Mechanical Engineering at The University of Akron. He received his Bachelor of Engineering in Mechanical Engineering (B.Eng., 1980)] from Bangalore University and Master of Science in Aerospace Engineering (M.S. 1981) and Doctor of Philosophy in Mechanical Engineering (Ph.D. 1984) from Georgia Institute of Technology. Dr. Srivatsan joined the faculty in The Department of Mechanical Engineering at The University of Akron in August 1987. Since joining, he has instructed undergraduate and graduate courses in the areas of (a) Advanced Materials and Manufacturing Processes, (b) Mechanical Behavior of Materials, (c) Fatigue of Engineering Materials and Structures, (d) Fracture Mechanics, (e) Introduction to Materials Science and Engineering, (f) Mechanical Measurements, (g) Design of Mechanical Systems, and (h) Mechanical Engineering Laboratory. His research areas currently span the fatigue and fracture behavior of advanced materials to include monolithic(s), intermetallic, nanomaterials and metal-matrix composites; processing techniques for advanced materials and nanostructure materials; inter-relationship between processing and mechanical behavior; electron microscopy; failure analysis; and mechanical design. He has authored/edited/co-edited 60 books in areas crosspollinating mechanical design; processing and fabrication of advanced materials; deformation, fatigue and fracture of ordered intermetallic materials; machining of composites; failure analysis; and technology of rapid solidification processing of materials. He serves as co-editor of International Journal on Materials and Manufacturing Processes and on the editorial advisory board of journals in the domain of Materials Science and Engineering. He has delivered over 200 technical presentations at national and international meetings and symposia; technical/professional societies; and research and educational institutions. He has authored and co-authored over 700 technical publications in archival international journals, chapters in books, proceedings of national and international conferences, reviews of books, and technical reports. In recognition of his efforts, contributions and their impact on furthering science, technology and education he has been elected (a) Fellow of the American Society for Materials, International (ASM Int.); (b) Fellow of American Society of Mechanical Engineers (ASME); and (c) Fellow of American Association for the Advancement of Science (AAAS). He has also been recognized as: (i) Outstanding Young Alumnus of Georgia Institute of Technology, (ii) Outstanding Research Faculty, the College of Engineering at The University of Akron, and (iii) Outstanding Research Faculty at The University of Akron. He offers his knowledge in research services to the U.S. Air Force and Navy), National Research Laboratories, and industries related to aerospace, automotive, power-generation, leisure-related products, and applied medical sciences.

Dr. T.S. Sudarshan obtained his Bachelor of Technology (B.Tech) degree in Metallurgy from Indian Institute of Technology Madras and completed his Master of Science (M.S.) and Doctor of Philosophy (Ph.D.) degrees in Materials Engineering Science from Virginia Polytechnic Institute and State University (Virginia Tech), USA. Dr. Sudarshan is currently the President and CEO of Materials Modification Inc., which is at the forefront of research, development and commercialization of advanced materials utilizing novel processing techniques. He has demonstrated technological leadership for well over three decades, and has worked extensively throughout his career in the areas spanning nanotechnology and surface engineering for which he is very well known throughout the world. Through his leadership, he has raised over $60 million in funding for the primary purpose of very high-risk, high-payoff advanced technology related programs in several nontraditional areas. Dr. Sudarshan has published well over 175 plus peer reviewed papers and has edited 32 books in the areas spanning Surface Modification Technologies and Advanced Materials. He is editor of two international journals, Surface Engineering and Materials and Manufacturing Processes, and holds over 25 patents. He has chaired numerous committees for all federal agencies, chaired many committees of the Ohio Third Frontier, served as a member of the National Materials Advisory Board and Trustee of ASM International. In recognition of his efforts, contributions and impact on furthering science, technology and their far-reaching applications, he has been elected as: (a) Fellow of the American Society for Materials, International (ASM Int.); (b) Fellow of the International Federation for Heat Treatment and Surface Engineering (IFHTSE), and (c) Fellow of the Institute of Materials. He was also awarded the Distinguished Alumni of Indian Institute of Technology (IIT Madras).

Dr. K. Manigandan obtained his Bachelor of Engineering (B.Eng. 2009) degree in Mechanical Engineering from SASTRA University, India and his Master of Science (M.S. 2011) and Doctor of Philosophy (Ph.D. 2014) degrees in Mechanical Engineering from The University of Akron, USA. Dr. Manigandan is presently Research Assistant Professor in the Department of Mechanical Engineering at The University of Akron. He is the author of over 60 technical publications in archival journals, proceedings of national and international conferences, and technical reports. His research interests and expertise include failure and fracture analysis of materials across the broad spectrum of metals and the family of composites to include novel metal-matrix composites and high-performance ceramic matrix composites. His current research interest and involvement is the use of innovative testing techniques to understand the mechanical behavior of novel materials, spanning both engineering (metals) and engineered (composites) for use in performance critical applications in the aerospace industry.