Design in Maritime Engineering: Contributions from the ICMAT 2021

Review of the Current Trend on Autonomous Vehicles in Developing Countries.- Review of Current Trends in Marine Energy on Large Tidal Current Turbine.- The National Contingency Plan Towards the Oil Spill Preparation and Response in Malaysia.- Simulation of Three-Point Bending Sandwich Composite Panel Through Finite Element Analysis.- The uses of Unmanned Aerial Vehicle (UAV) for Slope Mapping with the Determination of Potential Slope Hazard.- Tensile Strength: +45 Isotropic FRP Laminate with Different Universal Testing Machine.- Instruments utilized in Short Sea Shipping Research: A Review.- Issues on Palm Oil with Regard to The Revised MARPOL Annex II. A Re-view.- Assessing The Efficacy of The Advance Transfer Technique in Calculating Wheel Over Point Through Simulation Study.- Polysulfone/Cellulose Acetate Phthalate/Polyvinylpyrrolidone (PSf/CAP/PVP) Blend Membrane: Effect of Evaporation Time on Blend Membrane Characteristics.- Influence of Deadrise on the Dynamic Instability of A 14 Metres Custom Boat in Regular Waves.- The Implication of Container Floating Terminal on The Efficiency of Port Klang's Terminal Operations and Domestic Freight Forwarding Industry.- The Optical Properties of Polyvinyl Alcohol (PVA), Phosphorylated Polyvinyl Alcohol (PPVA) and Phosphorylated Polyvinyl Alcohol - Aluminum Phosphate (PPVA-AlPO4) - Nanocomposite. Effect of Phosphate Groups.- Tensile and corrosion resistance studies of MXenes/nanocomposites - A Review.- Effect of Nanofillers on The Mechanical Properties of Epoxy Nanocomposites.- The degradation of mechanical properties caused by acetone chemical treatment on 3D-printed PLA-carbon fibre composites.- Tensile and Morphology Analysis of Oil Palm Trunk (OPT) Specimen Re-inforced Epoxy Fabricated via Vacuum Assisted Resin Transfer Moulding (VARTM).- The Analysis of Container Terminal Throughput Using ARIMA and SARIMA.- Investigation on the Mechanical and Microstructural Characteristics of Diffusional Bonded Gray Cast Iron and Low Carbon Steel.- Examination Table Innovation Static into Dynamic which Ergonomic using Anthropometry Approach and Rational Method.